S-Seal Coated Neoprene Gloves

These are neoprene water-sports gloves with an S-Seal sealed outer skin, so the back of the hand and the cuff carry a slick, non-absorbent surface instead of a knitted nylon face. Panels are glued and blind-stitched, and the palm takes a raised cross-hatch grip. Dive shops, spearfishing brands and rental fleets use them for low-drag, fast-drying handwear built to their own logo, size grading and packing.

Key Features

• S-Seal sealed outer skin: a continuous slick coating closes the fabric face on the back of the hand and the cuff, so water runs off instead of soaking in; the glove stays light on deck and dries faster between dives.
• Cross-hatch grip palm: a raised X-grid pattern across the palm and the inner fingers adds friction on wet speargun handles, flashlight bodies and paddle shafts, where a smooth coated palm would slide.
• Glued and blind-stitched seams: panels are bonded, then blind-stitched, so no open needle line runs through the full sheet; the seam lies flat and leaves no stitch channel for water to track along.
• Hook-and-loop wrist strap: the strap pulls the sealed cuff down over the wrist, trims the entry flush and keeps the glove seated while you clear a mask or work a reel.
• Sealed face, warmer core: a woven face passes water through the outer cloth on every stroke, while the sealed skin limits that through-flow, so the neoprene holds the heat it builds.
• Plain black through the size run: one colourway from XS to XXL keeps a rental set uniform and gives an even base for print or embroidery.

Specifications

Material	Neoprene with sealed S-Seal outer face
Outer surface	S-Seal slick sealed coating, back of hand and cuff
Palm	Raised cross-hatch grip
Seams	Glued and blind-stitched
Cuff	Hook-and-loop wrist strap
Sizes	XS-XXL, custom sizing
Colour	Black as shown, custom accepted
Logo	Custom print, transfer or embroidery
MOQ	50 pcs per colour
Lead time	Samples 7-10 days; bulk 25-35 days
Packing	1 pc per polybag, 40 pcs per carton

Customisation

• Colour: black as standard, with body, cuff binding and strap matched to your palette and approved on a sample pair.
• Logo and labels: print, transfer or embroidery on the back of the hand, plus your care label, hangtag and polybag artwork.
• Size sets: XS-XXL retail grading, or a custom run built to your fleet measurements and packed as matched pairs.

Applications

Suited to scuba diving and spearfishing in cool water, snorkeling, freediving, kayak and paddle-board paddling, sailing deck work, and hire counters that need gloves to dry overnight.

Size Guide

Hand and glove sizing (cm). Standard grading, all measurements in cm.

Size	Palm circumference	Hand length
XS	16-18	16-17
S	18-20	17-18
M	20-22	18-19
L	22-24	19-20
XL	24-26	20-21

Measurements are taken on the garment laid flat, with a tolerance of plus or minus 1 cm. Custom size grading is available for every style.

FAQ

Q: What does the S-Seal coating do?
A: It seals the outer fabric face with a slick coating, so the glove does not take on water like a plain nylon-faced glove. It is a surface finish, not a waterproof membrane, and it does not seal the cuff.

Q: Does the smooth back make the glove slippery?
A: The S-Seal skin covers the back of the hand and the cuff; grip comes from the raised cross-hatch on the palm and fingers, so the working side stays secure on wet handles.

Q: Can we specify colour, logo and sizing?
A: Yes. Body colour, palm pattern, strap colour and logo placement are open to your specification, in standard XS-XXL or a custom grading. MOQ is 50 pcs per colour.

Q: What are the sample and bulk lead times?
A: Samples take 7-10 days and bulk production runs 25-35 days from approval and deposit. Packing is 1 pc per polybag, 40 pcs per carton.

Why Buy From SINOVELL

• Factory-direct OEM/ODM with pre-production samples.
• Wetsuits, lycra wear, gloves, socks, hoods and neoprene sheets from one supplier.
• Your logo, colours, size grading and packaging.