3mm Neoprene Dive Gloves

These are black 3 mm neoprene dive gloves, sewn with full fingers, a mesh grip panel across the palm and the inside of the fingers, and an adjustable strap at the wrist. The body is CR/SCR/SBR double-sided composite neoprene with a soft stretch fabric facing, glue-bonded and blind-stitched so the seams stay closed under load. They are made for scuba divers, spearfishers, snorkelers and rental fleets that want one plain black glove for existing kit, and for importers and dive brands needing their own logo, colors and size grading.

Key Features

• Mesh grip panel: a textured mesh laminate over the palm and finger insides keeps tanks, rails, spear guns and camera housings under control when wet.
• Adjustable wrist strap: a strap and buckle at the cuff cinch the glove over the wetsuit sleeve, which cuts the water that flushes through on a long dive.
• 3 mm composite neoprene: CR/SCR/SBR sheet faced with soft stretch fabric on both sides gives warmth without taking away the feel needed for buckles, valves and knots.
• Glued and blind-stitched seams: panels are glued first and then blind-stitched through the outer skin only, so the stitch line does not open a channel into the glove.
• Solid black colorway: a plain black shell with a matching black grip panel, so one stock code pairs with black wetsuits, drysuits and buoyancy jackets and covers a whole rental fleet.
• Palm and finger protection: the neoprene and grip layer cushion the hand against sharp rocks, shells, coral and fish spines, while the fingers stay flexible enough to work a clip.

Specifications

Material	CR/SCR/SBR neoprene, stretch fabric both sides
Thickness	3 mm
Grip	Mesh panel on palm and finger insides
Wrist	Adjustable strap with buckle
Seams	Glued and blind-stitched
Sizes	XS-XXL, custom grading
Color	Black as shown, or custom
Logo	Custom print, patch or embroidery
MOQ	50 pcs per colour
Lead time	Samples 7-10 days; bulk 25-35 days
Packing	1 pc per polybag, 40 pcs per carton

Customisation

• Color: black as shown, or a custom shell or grip-panel color matched to your swatch.
• Logo: screen print, silicone transfer or woven label on the back of the hand or on the wrist strap.
• Design: strap width, cuff height and grip-panel coverage can be changed on a pre-production sample.
• Sizing and packing: your own size chart and grading, plus hang tags, polybag printing and carton marks.

Applications

Boat and shore scuba diving, spearfishing over rock and reef, snorkeling, kayaking and paddle boarding, kiteboarding and water-skiing, and pool or open-water training where a fleet needs one hard-wearing black glove.

Size Guide

Hand and glove sizing (cm). Standard grading, all measurements in cm.

Size	Palm circumference	Hand length
XS	16-18	16-17
S	18-20	17-18
M	20-22	18-19
L	22-24	19-20
XL	24-26	20-21

Measurements are taken on the garment laid flat, with a tolerance of plus or minus 1 cm. Custom size grading is available for every style.

FAQ

Q: Is 3 mm warm enough for cold water?
A: 3 mm suits temperate water and the colder layer of a warm-water dive. Below roughly 15 degrees C most divers move to a 5 mm glove; both thicknesses can ship on one order.

Q: Can we have our own logo, colors and sizing?
A: Yes. MOQ is 50 pcs per colour, pre-production samples take 7-10 days, and bulk production runs 25-35 days after sample approval. Logo, shell color, grip panel and size grading are all made to your specification.

Q: How do we confirm fit before a bulk order?
A: Order a sample pair in your main size. Standard sizing runs XS-XXL and we can also grade to your own size chart, while the wrist strap takes up the difference between a thin summer suit and a thicker winter sleeve.

Q: How should the gloves be cared for?
A: Rinse in fresh water after salt-water use, dry in the shade away from direct heat, and store flat so the grip panel does not take a set. Do not machine dry or iron neoprene.

Why Buy From SINOVELL

• Factory-direct OEM/ODM with pre-production samples.
• Wetsuits, lycra wear, gloves, socks, hoods and neoprene sheets from one supplier.
• Your logo, colors, size grading and packaging.