This men’s scuba top is a 3 mm neoprene upper layer sold without a bottom, made to be worn with any wetsuit trousers, shorts or long john a diver already owns. The body is CR neoprene with a single-sided nylon lamination, blind-stitched at every seam and finished in black. It is aimed at importers, dive shops, rental fleets and private-label brands that want one plain, hard-wearing upper layer they can stock in a single colour and brand as their own.
Key Features
Bare neoprene inner face: the lamination runs on one side only, so the outside carries a nylon jersey for abrasion resistance and print while the inside stays open neoprene that sits close to the skin and limits water movement under the top.
3 mm CR body: a middle weight that keeps the torso warm through long surface intervals without the bulk and buoyancy of a 5 mm suit.
Blind-stitched seams: the needle does not pass through the full sheet, so the seam sits flush against the skin and the stitch line does not become a cold channel.
Top-only build: pairs with 3 mm, 5 mm or short bottoms already in your range, so one SKU covers divers who want a warmer core without replacing a full suit.
Sun protection and scratch resistance: the nylon face shields shoulders and back from sun on the boat and takes scuffs from reef, deck and tank racks.
Lightweight and easy to clean: rinses in fresh water, dries quickly on a hanger and packs flat into a mesh bag or day pack.
Sizes S-3XL: one grading covers most adult male divers, with size adjustments available for your market.
Specifications
Material
CR neoprene, single-sided nylon lamination
Inner face
Bare (unlined) neoprene
Thickness
3 mm
Seams
Blind-stitched
Sizes
S-3XL, custom grading
Colour
Black; other colours on request
Logo
Custom print or embroidery
MOQ
50 pcs per colour
Lead time
Samples 7-10 days; bulk 25-35 days
Packing
1 pc per polybag, 40 pcs per carton
Customisation
Branding: your logo printed or embroidered on the chest or back panel, with artwork confirmed on a pre-production sample before bulk.
Colour and material: black as standard; other colours, and SCR or SBR bodies, can be quoted on request.
Size grading and packing: we adjust the S-3XL grade to your market’s measurements and print your polybag, hang tag and carton marking inside the standard pack of 1 pc per polybag, 40 pcs per carton.
Applications
Boat and shore scuba diving, snorkeling, freediving practice, pool training, dive-school rental racks and spearfishing, paired with any wetsuit bottom already in the fleet.
Size Guide
Men’s sizing (cm). Standard grading, all measurements in cm.
Size
Chest
Waist
Hip
Height
S
91-96
76-81
94-99
170-175
M
96-101
81-86
99-104
175-180
L
101-106
86-91
104-109
180-185
XL
106-111
91-96
109-114
185-190
2XL
111-116
96-101
114-119
190-195
3XL
116-121
101-106
119-124
195-200
Measurements are taken on the garment laid flat, with a tolerance of plus or minus 1 cm. Custom size grading is available for every style.
FAQ
Q: Is the wetsuit bottom included? A: No. This page covers the top only, cut to be worn with any wetsuit trousers, shorts or long john, so it can be paired with bottoms you already stock.
Q: What does “bare neoprene” mean on this top? A: The nylon is laminated to one side of the CR sheet only. The outer face is nylon for abrasion resistance and printing; the inner face is open neoprene with no lining, so it sits close to the skin.
Q: Can you match our colour and add our logo? A: Yes. Black is standard, other colours can be quoted, and your logo can be printed or embroidered on the chest or back. Artwork is confirmed on the pre-production sample.
Q: What are the minimum order and lead times? A: 50 pcs per colour. Samples take 7-10 days and bulk production 25-35 days, packed 1 pc per polybag and 40 pcs per carton.
Why Buy From SINOVELL
Factory-direct OEM/ODM with pre-production samples.
Wetsuits, lycra wear, gloves, socks, hoods and neoprene sheets from one supplier.
