Neoprene Drysuit for Cold-Water Diving

A full-body dry suit made from 8 mm pressure-resistant CR neoprene, with an attached hood, a dry zipper and integrated boots. It is built for cold-water and commercial diving, where the water is too cold and too dirty for a wetsuit. SINOVELL supplies it as an OEM/ODM programme, so the cut, branding and size grading follow your range instead of a stock catalogue.

Key Features

• 8 mm CR neoprene shell: heavyweight, pressure-resistant material that resists compression during long working dives in cold water.
• Attached neoprene hood: bonded to the suit, so there is no separate hood to pull on and no open gap at the neck.
• Dry zipper entry: the main closure is a dry zipper, giving a sealed entry point that a standard wetsuit zip does not.
• Waterproof neck and wrist seals: the three water entry points – zip, neck and cuffs – are all closed, so the body stays dry inside the suit.
• Integrated boots: the boots are part of the suit, so a diver crosses deck plate, rock and ladder rungs without separate booties.
• Reinforced knees: an extra panel where divers kneel most – gravel, steel deck, tunnel floor – to slow wear at the highest-stress point.

Specifications

Material	8 mm pressure-resistant CR neoprene
Thickness	8 mm
Hood and boots	Attached neoprene hood; integrated boots
Closure	Dry zipper
Seals	Waterproof neck and wrist seals
Reinforcement	Reinforced knees
Colour	Black as shown, or custom
Sizes	Graded to your size chart
MOQ	50 pcs per colour
Lead time	Samples 7-10 days; bulk 25-35 days
Packing	1 pc per polybag, 40 pcs per carton

Customisation

• Colour: black as standard; custom neoprene colours matched to your swatch for team, rental or brand ranges.
• Logo: print or embroidery on the chest, sleeve or hood, placed to your artwork.
• Size grading: the suit is graded to your own size chart, so torso length and boot size follow your market rather than a fixed stock run.
• Packaging: your logo on the polybag and carton, with hangtag and size sticker options.

Applications

Cold-water and commercial diving: glacier and ice-diving support, engineering and underwater inspection, cave and overhead survey work, and sewage or contaminated-water maintenance for utility and municipal dive teams.

Size Guide

Men’s sizing (cm). Standard grading, all measurements in cm.

Size	Chest	Waist	Hip	Height
S	91-96	76-81	94-99	170-175
M	96-101	81-86	99-104	175-180
L	101-106	86-91	104-109	180-185
XL	106-111	91-96	109-114	185-190
2XL	111-116	96-101	114-119	190-195
3XL	116-121	101-106	119-124	195-200

Measurements are taken on the garment laid flat, with a tolerance of plus or minus 1 cm. Custom size grading is available for every style.

FAQ

Q: Are the hood and boots included?
A: Yes. The hood is attached to the suit and the boots are integrated, so it arrives as a single piece.

Q: Which diving conditions is it made for?
A: Cold-water professional work – glacier, cave, engineering and sewage diving – where a wetsuit would flush and lose heat.

Q: Can we order our own colour, logo and size grading?
A: Yes. Custom colour, printed or embroidered logo and grading to your size chart are all available, at 50 pcs per colour minimum and 7-10 days for samples.

Q: How is the suit packed for export?
A: 1 pc per polybag and 40 pcs per carton, with bulk production at 25-35 days after sample approval.

Why Buy From SINOVELL

• Factory-direct OEM/ODM with pre-production samples.
• Wetsuits, lycra wear, gloves, socks, hoods and neoprene sheets from one supplier.
• Your logo, colours, size grading and packaging.