Neoprene Chest Waders with Rubber Boots

These are chest-high hunting and fishing waders: a camouflage neoprene upper bonded to a pair of vulcanised rubber boots, held up by adjustable webbing braces. The neoprene body covers the legs, seat and chest, so you can stand in cold marsh water without a separate pair of wading boots underneath. They are built for waterfowl hunters, river and lake anglers, marsh guides and rental fleets, and for importers and hunting brands that want the pattern, boot sizing, logo and packing fixed before bulk production.

Key Features

• Reed camouflage upper: a brown and tan reed print across the legs and chest, finished with dark brown binding and a plain brown neoprene chest panel.
• Vulcanised rubber boots: each boot is bonded to the leg as one piece, so there is no stocking foot to pair with a separate boot and no ankle gap for silt.
• Moulded rubber outsole: a cleated sole for mud, gravel bars, slipways and wet grass.
• Adjustable webbing braces: wide brown braces with side quick-release buckles; set the length once, then clip in and out at the waist.
• Flap-covered chest pocket: a boxed pocket across the chest holds a phone, licence or fly box, and the flap keeps splash out.
• Pull-on, rinse-off build: step in, pull the braces up and clip; rinse inside and out and hang from the braces to dry.
• OEM-ready: pattern, trim colour, boot sizing, logo and packing set at sampling, from 50 pcs per colour.

Specifications

Material	Neoprene upper with camouflage face fabric
Boots	Vulcanised rubber, bonded to the leg
Cut	Chest-high, sleeveless, brown neoprene chest panel
Braces	Adjustable webbing with quick-release side buckles
Pocket	Flap-covered chest pocket
Sizes	Body sizes graded to your chart, boot size paired per size
Colour	Reed camouflage with brown trim; custom on request
Logo	Custom print or embroidery
MOQ	50 pcs per colour
Lead time	Samples 7-10 days; bulk 25-35 days
Packing	1 pc per polybag, 40 pcs per carton

Customisation

• Camouflage: our stock reed pattern, or your artwork printed on the face fabric and checked on a sample.
• Boot and trim colour: brown as standard, with boot colour and binding matched to your swatch on request.
• Sizing: body sizes cut to your measurement chart, with the boot size paired to each body size so a fleet orders one code per wearer.
• Branding and packing: print or embroidery on the chest panel, woven labels, hangtags, polybags and carton marks as instructed.

Applications

Flooded fields and marsh blinds for waterfowl, river and lake banks, boat ramps, bait and clam digging, and wet-weather work around stables and yards.

Size Guide

Wader sizing (cm). Standard grading, all measurements in cm.

Size	Chest	Waist	Inseam	Height
M	96-101	81-86	78-80	170-178
L	101-106	86-91	80-82	175-183
XL	106-111	91-96	82-84	180-188
2XL	111-116	96-101	84-86	185-193

Measurements are taken on the garment laid flat, with a tolerance of plus or minus 1 cm. Custom size grading is available for every style.

FAQ

Q: Are the boots rubber or PVC?
A: They are vulcanised rubber, bonded to the neoprene leg, and rubber stays supple in cold weather. If your market prefers moulded PVC boots, we make that version as a separate model.

Q: What neoprene thickness do you supply?
A: The neoprene sheet is specified on your order. Tell us the thickness and lining you need, and we confirm it on the pre-production sample.

Q: Can we use our own camouflage pattern?
A: Yes. Send the artwork or a fabric swatch and we print it on the upper, then show the print on the sample so you can check scale, colour and panel placement.

Q: What are the MOQ and lead times?
A: MOQ is 50 pcs per colour. Samples take 7-10 days, bulk production 25-35 days, and packing is 1 pc per polybag, 40 pcs per carton.

Why Buy From SINOVELL

• Factory-direct OEM/ODM with pre-production samples.
• Wetsuits, lycra wear, gloves, socks, hoods and neoprene sheets from one supplier.
• Your logo, colours, size grading and packaging.