This is the original LBD-ECU controller module for LBD electric jet surfboards: a 12V output unit with 65Wh battery capacity, an 82 mm diameter by 125 mm housing and a low-voltage alarm that trips at 9.8V. It handles power delivery to the jet drive and the signal feed to the digital display panel, so a board that will not power up or has lost its readout can be repaired instead of retired. We supply it to importers, rental fleets and e-surfboard brands that keep LBD boards in service, as a single spare part or in fleet service quantities, with your label and carton artwork.
Key Features
Genuine LBD-ECU module: the factory controller rather than a generic substitute, so the pinout and mounting points match the board it is replacing.
Plug-and-play swap: connects to the existing harness with no rewiring or firmware step, which keeps a fleet repair inside one workshop visit.
Stable 12V output: the propulsion electronics get a steady supply instead of a voltage that sags as the drive draws current.
9.8V low-voltage alarm: warns the rider before the pack is run flat, which is what protects the battery from over-discharge damage.
Sealed marine housing: the case is closed against spray, splashes and the humid air that collects in a board hull between sessions.
Clean signal to the display: speed and charge data reach the digital panel, so the readout matches what the jet drive is actually doing.
Electric boards only: built for LBD electric jet surfboards; petrol models run a different ignition and fuel circuit and cannot take this unit.
Specifications
Model
LBD-ECU
Battery capacity
65Wh
Output voltage
12V
Low-voltage alarm
9.8V
Controller size
82 mm diameter x 125 mm
Housing
Waterproof, sealed for marine use
Display support
Digital display panel
Fitment
LBD electric jet surfboard, not petrol models
MOQ
50 pcs per colour
Lead time
Samples 7-10 days; bulk 25-35 days
Packing
1 pc per polybag, 40 pcs per carton
Customisation
Housing label carrying your logo, part number and barcode for dealer stock, printed or marked to your artwork and approved on the pre-production sample.
Carton artwork, insert card and manual language prepared for your market, so the part arrives shelf-ready for a dealer rather than as a bare module.
Order as a single replacement unit or as fleet service stock at 50 pcs per colour, with samples in 7-10 days and bulk production in 25-35 days.
Applications
Warranty and service stock for LBD electric surfboard rental fleets, spare-parts shelves at dive and water-sports dealers, and repairs of boards that no longer power the jet drive or show readings on the panel.
FAQ
Q: Will it fit a petrol-driven surfboard? A: No. The LBD-ECU is specified for LBD electric jet surfboards only; petrol boards use a different ignition and fuel circuit.
Q: Is this an original LBD part? A: Yes. It is the original factory controller module, supplied as a replacement part, not a third-party copy.
Q: What happens when the pack reaches 9.8V? A: The low-voltage alarm triggers at 9.8V and warns the rider to head in and recharge before the battery is over-discharged.
Q: Can we install it in our own workshop? A: It is plug-and-play into the factory harness with no rewiring, though we recommend fitting by a technician who already services the board.
Why Buy From SINOVELL
Factory-direct OEM/ODM with pre-production samples.
Wetsuits, lycra wear, gloves, socks, hoods and neoprene sheets from one supplier.
Your logo, colours, size grading and packaging.
Spare-part support for LBD boards, with controller, battery and intake cover quoted as separate line items.
