8mm CR Neoprene Drysuit with Boots

This full-body drysuit is built as a one-piece shell with the boots sealed into the legs, so entry is a single sealed zip and the body stays closed from neck to sole. The shell is 8 mm compression-resistant CR neoprene, reinforced at the knees and sealed at the neck and wrists. It is made for commercial dive contractors, cave and technical teams, glacier and search-and-recovery operators, and for brands building a heavy-duty dry line under their own label.

Key Features

• 8 mm compression-resistant CR neoprene resists compression at depth, so the foam keeps its thickness and the insulation you size for at the surface is still there on a long cold dive.
• Boots are integrated into the legs and sealed in place, so there is no ankle seal to tape or inspect, and one item covers the diver from neck to sole on gravel, ladder rungs and rocky shore entries.
• Waterproof neck and wrist seals work with the sealed zipper, closing the three entry points before the diver leaves the surface.
• Reinforced knees add abrasion protection where drysuits wear first: kneeling on rock, working from ladder rungs and contact with pipeline, wreck or harbour structure.
• Black through the body hides the scuffs, sediment marks and stains that come with engineering and contaminated-water work.
• One-piece construction gives fleets a single line item to stock and replace, instead of matching a suit to separate dry boots.

Specifications

Material	8 mm compression-resistant CR neoprene
Thickness	8 mm
Type	Full-body dry suit with integrated boots
Waterproofing	Waterproof neck and wrist seals with sealed zipper system
Reinforcement	Reinforced knees
Colour	Black, as shown or custom
Sizes	XS-XXL, custom sizing
Logo	Custom print or embroidery
MOQ	50 pcs per colour
Lead time	Samples 7-10 days; bulk 25-35 days
Packing	1 pc per polybag, 40 pcs per carton

Customisation

• Black as standard, with contrast panels or a full custom colourway matched to a swatch.
• Logo by print or embroidery on the chest, shoulder or back, or a woven label for a softer finish.
• Size grading from XS to XXL to your market’s measurements, including tall and short builds and a cut that sits over your thermal base layer.
• Boot and seal sizing, zip length and packaging set to your sheet, with your hangtag, polybag print and carton marking.

Applications

Supplied to commercial dive contractors and search-and-recovery teams for engineering inspection of dams, pipelines and harbours, to cave and glacier diving groups, and to crews working sewage and contaminated water.

Size Guide

Men’s sizing (cm). Standard grading, all measurements in cm.

Size	Chest	Waist	Hip	Height
S	91-96	76-81	94-99	170-175
M	96-101	81-86	99-104	175-180
L	101-106	86-91	104-109	180-185
XL	106-111	91-96	109-114	185-190
2XL	111-116	96-101	114-119	190-195
3XL	116-121	101-106	119-124	195-200

Measurements are taken on the garment laid flat, with a tolerance of plus or minus 1 cm. Custom size grading is available for every style.

FAQ

Q: Are the boots separate, or part of the suit?
A: They are part of the suit. The boots are built into the legs and sealed, so there is no ankle seal to manage and no boot to order separately. Send your boot size range and we grade leg and boot length to match.

Q: What diving conditions is this suit intended for?
A: Cold water, including glacier, cave, engineering and sewage diving. The 8 mm shell and closed neck, wrist and zip system suit long exposures at low temperature and in water where the diver should stay fully covered.

Q: Why specify 8 mm compression-resistant CR rather than a thinner shell?
A: Neoprene foam loses insulating thickness as pressure rises. A compression-resistant CR grade holds more of its loft at depth, which matters on cold, deep or long working dives where a thinner shell would leave the diver short of insulation.

Q: Can we order our own colours, logo and size range?
A: Yes. Black is standard, and custom colourways, print or embroidered logos, XS-XXL grading and boot sizes are made to your specification, with a pre-production sample approved before bulk.

Why Buy From SINOVELL

• Factory-direct OEM/ODM with pre-production samples.
• Wetsuits, lycra wear, gloves, socks, hoods and neoprene sheets from one supplier.
• Your logo, colours, size grading and packaging.